Căutare 2009 fascicula9 nr1 după Titlu
Afișează articolele 1-20 of 33
-
Analysis of Titanium Inteface and Tungsten Exterior layer Thickness Coated by Vibrator Electrode Method
(Universitatea "Dunărea de Jos" din Galați, 2009)The goal of this paper is to create metallic materials with superior functional performances. The layer obtained by electrode vibrator method must have a very good adherence on part surface and a high chemical and thermal ... -
Analytical Methods Helping the Archaeologists: Archaeometry
(Universitatea "Dunărea de Jos" din Galați, 2009)Very important objects of cultural heritage are material objects and objects of art produced by all communities. The physical and mechanical properties of material culture are always of prime concern to archaeometry and ... -
Behavior of A537 Steel Grade in Carburizing in Fluidized Bed with Endothermic Atmosphere
(Universitatea "Dunărea de Jos" din Galați, 2009)Fluidized bed allows one to easily change from the chemical composition of the working atmosphere. The paper is based on experiments of carburizing in fluidized bed with endothermic atmosphere made from gases resulting ... -
Characterization of Iron and Low Alloy Steel Powders Obtain by Water Atomization
(Univerversitatea "Dunărea de Jos" din Galați, 2009)Three types of iron and low ally steel powders were investigated to determinate their physical properties and surface morphology by SEM analysis. The powders were obtained by water atomization. The first type of powder ... -
Characterization of Thick Hard Layers with ni-Cr-B-Fe-Al Alloy Obtained by Laser Cladding
(Universitatea "Dunărea de Jos" din Galați, 2009)To increase the resistance to wear and corrosion of the surface layers made from steel with 0.45% C, multilayer deposition was tested by injection of powder with chemical composition of 8.9% Cr, 4.5% Fe, 5.1% B, 2, 4% ... -
Cladding by Welding with Hard Alloys
(Universitatea "Dunărea de Jos" din Galați, 2009)The paper presents the results of a research on the role of cladding by welding support of continuous casting plant. Emphasizing that plating leads to outer layer the study presents a complex of properties favorable for ... -
Corrosion of Bronze Art Objects and Methods of Restoration
(Universitatea "Dunărea de Jos" din Galați, 2009)The paper presents a study of the corrosive state of sculptures and art objects made from copper and bronze, the equipment used to detect and study defects and the methods and solutions for restoring the art object ... -
Critical Analysis of "Maximum Stress Failure"
(Universitatea "Dunărea de Jos" din Galați, 2009)The paper deals with critical considerations upon different points of view that were enounced by some authors referring to Maximum Stress Failure Criterion for composite materials. The considerations stem both from a ... -
EDX Analysis of Laser Cladding Layers with Ni-Cr-B-Fe-Al Alloy
(Universitatea "Dunărea de Jos" din Galați, 2009)Multilayer cladding by injection of powder with 8.9% Cr, 4.5% Fe, 5.1% B, 2.4% Al, 0.6% Cu, Ni rest as chemical composition, in melted bath by a continuous wave CO2laser connected to x-y-z coordinate table was tested in ... -
Electrochemical Deposition and SEM Surface morphology of Co and UHMWPE/Co Composite Layers
(Universitatea "Dunărea de Jos" din Galați, 2009)The work aims at obtaining composite coatings in cobalt matrix with dispersed phase UHMWPE (ultra high molecular weight polyethylene) and at characterizing the surface morphology analyse by SEM, the thickness of the ... -
Elements of Drawing Theory and Technology of the High Mechanical Strength Wires in Ultrasonic Field
(Universitatea "Dunărea de Jos" din Galați, 2009)In the paper are presented elements of drawing theory and technology of the high mechanical strength wires, when the auger die is located in the maximum of the waves oscillation and it is activated on drawing direction. ... -
Experimental Researches Concerning the Influence of the Oxynitrocarburizing Thermochemical Treatment Over the Structure and Corrosion Resistance of C40 Steel
(Universitatea "Dunărea de Jos" din Galați, 2009)The aim of the paper is to present the results of the experimental researches regarding the corrosion behaviour of C40 steel, thermochemical treated by oxidant nitrocarburizing at 570°C. The thermochemical treatment was ... -
Experimental Studies Regarding the Implementation Possibilies of a Quality Control System for Ceramic Products in Continuous Flux Production
(Universitatea "Dunărea de Jos" din Galați, 2009)In the current paper the authors studied the possibilities and limitations of a system intended to evaluate the quality of ceramic products directly on the production line. The system is based on a data mining specific ... -
Heavy Metal Ions Cu (II), Co (II) and Cr (III) bufunctionally Improved with Hydroxamic and Amidoxime Groups Chelating Ion Exchangers
(Universitatea "Dunărea de Jos'' din Galați, 2009)Two new types of bifunctional chelating ion exchangers on the basis of ethylacrylate acrylonitrile: divinylbenzene copolymers with hydroxamic acid and amidoxime groups have been evaluated for Cu(II), Co(II) and Cr(III)ions ... -
Improving of Functional Parameters for Pressure Casting Machine with High Degree of Finishing
(Universitatea "Dunărea de Jos" din Galați, 2009)The paper presents a mathematic model of static and dynamic characteristics for casting machine. This machine has a hydraulic action for the casting chamber (her closing and introducing of molten alloy). This action is ... -
Influence of Technological Parameters on the Evolution of Nickel Films Deposited by Electrolysis
(Universitatea "Dunărea de Jos"din Galați, 2009)The influence of technological parameters on the structure of nickel layers electrodeposited on a copper substrate in a Watts bath has been studied. The complex influence of current densities, temperature and pH values ... -
Making Cast Piece Using Exothermic Head
(Universitatea "Dunărea de Jos' din Galați, 2009)In this paper presents a study about cost of part obtained with exothermal heads by replacement of classic heads. This method contributes to conduct solidification of cost pieces, because exothermal heads are forecast ... -
Physical-Chemical Properties (Cu-Sn) -Mo Composite Materials
(Universitatea "Dunărea de Jos" din Galați, 2009)The article is devoted to the study of corrosive and thermal stability of materials composition on the basis of copper, obtained by the EB-PVD method. It is shown in this work that corrosion of (Cu-Sn)–Mo composites have ... -
Preliminary Investigations Concerning Monitoring of Water Pollution Level
(Universitatea "Dunărea de Jos" din Galați, 2009)The aim of this paper is to develop an effective tool based on artificial intelligence techniques for monitoring and characterization of surface waters. Monitoring of the pollution in the aquatic environment consists in ... -
Quality Engineering Procedures Applied to Determine the Weight of Influence of Factors on Microtrigeneration Systems (mCCHP)
(Universitatea "Dunărea de Jos" din Galați, 2009)Microtrigeneration systems are characterized by simultaneous generation of power, heat and cold for small applications (<50kW) and are designed for reducing GHG and other emission degreases. The cooling generation by ...
