Some Experimental Results Concerning the Influence of Surface Coatings on the Wear of Poly-Ether-Etherketone (Peek) Polymeric Gears

dc.contributor.author	Petrov, Dimitar
dc.contributor.author	Dearn, Karl
dc.contributor.author	Walton, Doug
dc.contributor.author	Banks, Richard
dc.date.accessioned	2017-10-22T06:50:17Z
dc.date.available	2017-10-22T06:50:17Z
dc.date.issued	2011
dc.identifier.issn	1221-4590
dc.identifier.uri	http://10.11.10.50/xmlui/handle/123456789/4548
dc.description	THE ANNALS OF “DUNĂREA DE JOS“ UNIVERSITY OF GALAŢI FASCICLE VIII, TRIBOLOGY, 2011 (XVII), Issue 1 ISSN 1221-4590	ro_RO
dc.description.abstract	Gears made of general purpose Poly-Ether-Ether-Ketone (PEEK) polymeric material and coated on their flanks with a thin layer of different solid lubricants MoS2, graphite (C), BN and PTFE are tested in relation to wear and mesh point temperature in conditions of prolonged running. The derived experimental results are graphically shown. Some conclusions are given (the order of wear increasing according to the type of coating (PTFE – the least wear, uncoated, graphite, MoS2, BN); proportional correlations between the wear and the mesh temperature etc.)	ro_RO
dc.language.iso	en	ro_RO
dc.publisher	UDJG	ro_RO
dc.subject	wear	ro_RO
dc.subject	polymer gears	ro_RO
dc.subject	solid (dry) lubricant coatings	ro_RO
dc.title	Some Experimental Results Concerning the Influence of Surface Coatings on the Wear of Poly-Ether-Etherketone (Peek) Polymeric Gears	ro_RO
dc.type	Article	ro_RO