Căutare 2009 fascicula9 nr1 după Data publicării
Afișează articolele 1-20 of 33
-
Improving of Functional Parameters for Pressure Casting Machine with High Degree of Finishing
(Universitatea "Dunărea de Jos" din Galați, 2009)The paper presents a mathematic model of static and dynamic characteristics for casting machine. This machine has a hydraulic action for the casting chamber (her closing and introducing of molten alloy). This action is ... -
Characterization of Thick Hard Layers with ni-Cr-B-Fe-Al Alloy Obtained by Laser Cladding
(Universitatea "Dunărea de Jos" din Galați, 2009)To increase the resistance to wear and corrosion of the surface layers made from steel with 0.45% C, multilayer deposition was tested by injection of powder with chemical composition of 8.9% Cr, 4.5% Fe, 5.1% B, 2, 4% ... -
Elements of Drawing Theory and Technology of the High Mechanical Strength Wires in Ultrasonic Field
(Universitatea "Dunărea de Jos" din Galați, 2009)In the paper are presented elements of drawing theory and technology of the high mechanical strength wires, when the auger die is located in the maximum of the waves oscillation and it is activated on drawing direction. ... -
EDX Analysis of Laser Cladding Layers with Ni-Cr-B-Fe-Al Alloy
(Universitatea "Dunărea de Jos" din Galați, 2009)Multilayer cladding by injection of powder with 8.9% Cr, 4.5% Fe, 5.1% B, 2.4% Al, 0.6% Cu, Ni rest as chemical composition, in melted bath by a continuous wave CO2laser connected to x-y-z coordinate table was tested in ... -
The Assessing of Mechanical Characteristics of the Steel Sheets Designed for Drawing for a Five-Month-Period as an Effect of Natural Ageing
(Universitatea "Dunărea de Jos" din Galați, 2009)In the paper it is presented a study run on a five-month-period regarding the changes in the mechanical characteristics due to natural ageing for a drawing steel, cold rolled, unalloyed with 0.04% C. The ageing tendency ... -
Analysis of Titanium Inteface and Tungsten Exterior layer Thickness Coated by Vibrator Electrode Method
(Universitatea "Dunărea de Jos" din Galați, 2009)The goal of this paper is to create metallic materials with superior functional performances. The layer obtained by electrode vibrator method must have a very good adherence on part surface and a high chemical and thermal ... -
Researches Regarding Temperature Influence on Classic and Synthetic Quenching Medium
(Universitatea "Dunărea de Jos" din Galați, 2009)In this paper were analyzed experimental graphics for quenching cooling curves of oil at 20°C,40°C,60°C, 80°C and carboxymethyl cellulose (CMC) 1,5% solution in water at the same temperatures. Velocity cooling was studied ... -
Utilisation of Electrochemical Methods for Characterization of Some Corrosion Inhibitors for Steel and Copper
(Universitatea "Dunărea de Jos" din Galați, 2009)The effect of chromate and molybdate on the corrosion inhibition of copper and steel has been investigated in two eutectics solution at room temperature. We used stationary electrochemical methods and optical microscopy ... -
Study Regarding Gravimetrical Corrosion of the Superficial Layers Obtained Through Electrical Discharge
(Universitatea "Dunărea de Jos" din Galați, 2009)The experimental research was made on superficial layers laid-down through electrical sparking on the steel carbon OLC 45 probes, the used electrode being made from a corrosion resistant material (Copper). The probes ... -
Heavy Metal Ions Cu (II), Co (II) and Cr (III) bufunctionally Improved with Hydroxamic and Amidoxime Groups Chelating Ion Exchangers
(Universitatea "Dunărea de Jos'' din Galați, 2009)Two new types of bifunctional chelating ion exchangers on the basis of ethylacrylate acrylonitrile: divinylbenzene copolymers with hydroxamic acid and amidoxime groups have been evaluated for Cu(II), Co(II) and Cr(III)ions ... -
Critical Analysis of "Maximum Stress Failure"
(Universitatea "Dunărea de Jos" din Galați, 2009)The paper deals with critical considerations upon different points of view that were enounced by some authors referring to Maximum Stress Failure Criterion for composite materials. The considerations stem both from a ... -
Study of the Sintering Process of Iron Powders Coated with Nano-Hydrocarbon and the Resulting Microstructure at Temperatures up to 1200°C
(Universitatea "Dunărea de Jos" din Galați, 2009)The objective of the research is development and study of a new ecologically friendly and technologically advanced method for introduction of carbon during sintering of low alloyed iron powders ASC 100.29. The method is ... -
Redesigning a Jaw Crusher Using Value Analysis Part I
(Universitatea "Dunărea de Jos" din Galați, 2009)Value Analysis (VA) is a method that provides an operating technique using a creative and organized approach. It is managed by a group, each of them selected according their expertise in specific subjects and coordinated ... -
Experimental Studies Regarding the Implementation Possibilies of a Quality Control System for Ceramic Products in Continuous Flux Production
(Universitatea "Dunărea de Jos" din Galați, 2009)In the current paper the authors studied the possibilities and limitations of a system intended to evaluate the quality of ceramic products directly on the production line. The system is based on a data mining specific ... -
Physical-Chemical Properties (Cu-Sn) -Mo Composite Materials
(Universitatea "Dunărea de Jos" din Galați, 2009)The article is devoted to the study of corrosive and thermal stability of materials composition on the basis of copper, obtained by the EB-PVD method. It is shown in this work that corrosion of (Cu-Sn)–Mo composites have ... -
Researches on the Viscoplastic Behavior of a CrMo Alloyed Steel
(Universitatea "Dunărea de Jos" din Galați, 2009)The paper shows the results of the researches concerning the deformation behavior of alloyed steel with chromium and molybdenum. The plastic deformation behavior is researched in the experimental way, using the torsion ... -
Electrochemical Deposition and SEM Surface morphology of Co and UHMWPE/Co Composite Layers
(Universitatea "Dunărea de Jos" din Galați, 2009)The work aims at obtaining composite coatings in cobalt matrix with dispersed phase UHMWPE (ultra high molecular weight polyethylene) and at characterizing the surface morphology analyse by SEM, the thickness of the ... -
Analytical Methods Helping the Archaeologists: Archaeometry
(Universitatea "Dunărea de Jos" din Galați, 2009)Very important objects of cultural heritage are material objects and objects of art produced by all communities. The physical and mechanical properties of material culture are always of prime concern to archaeometry and ... -
Quality Engineering Procedures Applied to Determine the Weight of Influence of Factors on Microtrigeneration Systems (mCCHP)
(Universitatea "Dunărea de Jos" din Galați, 2009)Microtrigeneration systems are characterized by simultaneous generation of power, heat and cold for small applications (<50kW) and are designed for reducing GHG and other emission degreases. The cooling generation by ... -
A Typical Surface Formations Found on the Corrosion Layer of Iron Artefacts
(Universitatea "Dunărea de Jos" din Galați, 2009)The paper presents the experimental results obtained by applying non-invasive methods (OM, SEM-EDX, XRF) on two iron artefacts from the IInd and the IIIrd centuries A.D. (discovered in the incineration graves from ...
