Mechanical properties and Abrasive Wear Behavior of Fluidized-bed Carburized Sintered Iron Alloys

dc.contributor.author	Marin, Mihaela
dc.contributor.author	Potecașu, Florentina
dc.contributor.author	Drugescu, Elena
dc.contributor.author	Potecașu, Octavian
dc.contributor.author	Alexandru, Petrică
dc.date.accessioned	2018-10-02T13:05:44Z
dc.date.available	2018-10-02T13:05:44Z
dc.date.issued	2012
dc.identifier.issn	1453 – 083X
dc.identifier.uri	http://10.11.10.50/xmlui/handle/123456789/5429
dc.description	The Annals of "Dunarea de Jos" University of Galati Fascicle IX Metallurgy and Materials Science N0. 4 – 2012, ISSN 1453 – 083X	ro_RO
dc.description.abstract	This paper is a study of the influence of fluidized bed carburizing of sintered steels on the mechanical properties and the abrasive wear behavior for two different types of powder. Carburizing was carried out at a temperature of 900° C and maintained for 20 minutes and 40 minutes, respectively. It was found that the best values for Vickers microhardness and abrasive wear were recorded when the carburizing time is 40 minutes for powder P2.	ro_RO
dc.language.iso	en	ro_RO
dc.publisher	Universitatea "Dunărea de Jos" din Galați	ro_RO
dc.subject	powder metallurgy	ro_RO
dc.subject	sintering	ro_RO
dc.subject	fluidized bed carburizing	ro_RO
dc.subject	abrasive wear	ro_RO
dc.title	Mechanical properties and Abrasive Wear Behavior of Fluidized-bed Carburized Sintered Iron Alloys	ro_RO
dc.type	Article	ro_RO