Behavior of Rp3-High Spped on Short Time Nitriding in Fluidized Bed

dc.contributor.author	Bâclea, Adolf
dc.contributor.author	Cazacu, Nelu
dc.contributor.author	Dobrovici, Sorin
dc.contributor.author	Drugescu, Elena
dc.contributor.author	Potecașu, Octavian
dc.date.accessioned	2018-10-09T07:53:20Z
dc.date.available	2018-10-09T07:53:20Z
dc.date.issued	2005
dc.identifier.issn	1453 – 083X
dc.identifier.uri	http://10.11.10.50/xmlui/handle/123456789/5478
dc.description	The Annals of "Dunarea de Jos" University of Galati Fascicle IX Metallurgy and Materials Science ISSN 1453 – 083X. NR 2 – 2005	ro_RO
dc.description.abstract	For steel nitriding, treatment time is a important factor. Gas and plasma nitriding are usual method to increase surface properties by nitriding. A close retort is used. Total time for treatment are higher because are necessary transition time for heating and cooling. Fluidized bed offer a short time for heating and cooling because furnace having an open retort. Work paper is based by nitriding experiments by experimental fluidized bed furnace. A gas mixture of ammonia and nitrogen was used. For samples were used HHS (Rp3) . Results were investigated micrographic, surface hardness test (HV5) and micro hardness (HV0,05).	ro_RO
dc.language.iso	en	ro_RO
dc.publisher	Universitatea "Dunărea de Jos" din Galați	ro_RO
dc.subject	nitriding	ro_RO
dc.subject	fluidized bed	ro_RO
dc.subject	HSS	ro_RO
dc.subject	short cycle	ro_RO
dc.title	Behavior of Rp3-High Spped on Short Time Nitriding in Fluidized Bed	ro_RO
dc.type	Article	ro_RO