Scientific papers - Annals of "Dunarea de Jos" University of Galati - Analele științifice ale Universității "Dunărea de Jos" din Galați: Recent submissions

Afișează articolele 781-800 of 1845

    • High-Speed Hybrid Angular Contact Ball Bearings Lubricated by Kerosene Mist 

      Paleu, Viorel (Universitatea ”Dunărea de Jos” din Galați, 2008)
      This paper presents some experimental research, carried-out on 7206C hybrid angular contact ball bearings lubricated by oil and kerosene mist. The monitored parameters are the friction moment of the testing bearing, and ...

    • Mathematical Models for the Whole Traction Mechanical System of the Technological Self-Propelled Machines 

      Axinti, Adrian-Sorin (Universitatea "Dunărea de Jos" din Galați, 2007)
      The paper achieves mathematical models of the integral traction mechanical system, that is the system achieved only with gearings organized in the transmission components , gearboxes, card differentials transmissions, ...

    • Experiences in Lubrication of non-Natural Gas Fuelled Stationary Engines 

      Novotny-Farkas, Frantz; Bauman, Karin; Leimeter, Tibor (Universitatea ”Dunărea de Jos” din Galați, 2008)
      In Europe, a huge number of generators for electric power, powered by those stationary engines are becoming increasingly popular in regions where these renewable fuel sources are available. Nevertheless, the continuously ...

    • Test-Rig for Pressure Measurements in an Aerostatic Bearing 

      Muscă, Ilie (Universitatea ”Dunărea de Jos” din Galați, 2008)
      The paper presents a test rig for local pressure investigation in an aerostatic or gasostatic bearing system. Using a simple and performant computer assisted measurement device, pressure evolution in lubrication area can ...

    • The Analysis of the Bending Sprigs' Weight Influence on the Resonance Characteristic of the Elastical Mechanical Systems 

      Debeleac, Carmen-Nicoleta; Drăgan, Nicușor (Universitatea "Dunărea de Jos" din Galați, 2007)
      The Analysis of the Bending Springs' Weight Influence on the Resonance Characteristic of the Elastical Mechanical Systems

    • Some Aspects about Driving Wheel/Rail Contact in Steady State Interaction 

      Mazilu, Traian (Universitatea ”Dunărea de Jos” din Galați, 2008)
      The driving wheel/rail steady state interaction and the response to harmonic excitation were studied using a complex model for track. The starting point for numerical simulations is the Green matrix of the track. The ...

    • Hip Joint Contact Pressure Distribution Pand After Triple Osteotomy 

      Laurian, Tiberiu; Marinca, Lucian; Tudor, Andrei; Pârvu, Felix (Universitatea ”Dunărea de Jos” din Galați, 2008)
      A 3−D reconstruction method based on CT scans was used to compute the femoral head coverage for dysplasic hips prior and after reconstruction surgery. The triple osteotomy technique was used to “reorient” the acetabulum ...

    • Investigation of Layers Formed Through Selective Transfer with Atomic Force Microscopy 

      Ilie, Filip; Tița, Constantin (Universitatea ”Dunărea de Jos” din Galați, 2008)
      Atomic force microscopy (AFM) has become a versatile tool for investigating local mechanical properties. In addition, through the AFM tip-couple interaction, it is possible to study the effects of perturbations and ...

    • Research Rearding of Composite Materials under the Influence of Abrasive Wear 

      Florea, Carmen; Florea, Alexandru; Chivu, Mioara (Universitatea ”Dunărea de Jos” din Galați, 2008)
      The method described in the paper will allow estimating the composite materials performances with different structures and various working conditions, with a view to estimate useful life of technological equipments parts ...

    • New Test Facility for Fluid Film Journal Bearings 

      Dimofte, Florin; Ene, Nicoleta M. (Universitatea ”Dunărea de Jos” din Galați, 2008)
      This paper describes a new experimental rig to test journal fluid film bearings. It has been operating at the NASA Glenn Research Center (GRC) in Cleveland, Ohio since August 2006. The rig can apply total radial loads of ...

    • The Mechanical Low Frequency Signal Reconstruction by it's Spectral Components 

      Grigorescu, Luiza (Universitatea "Dunărea de Jos" din Galați, 2007)
      This paper is a point of view of a new way of signal reconstruction through it’s spectral components. Sampling theory is analyzed from different perspectives, what means if for technical reasons the time can’t be sampled ...

    • Dynamic Models for the Traction System of the Self-Propelled Machines 

      Axinti, Adrian-Sorin; Goanță, Adrian Mihai (Universitatea "Dunărea de Jos" din Galați, 2007)
      The work presents a classification of traction systems as a function of structure, the systems being classified into: integrally mechanical-tractional systems–STIM, mechanical-hydrostatical tractional -STMH and integrally ...

    • Assisted Research of the Rigidity Amplitude of Worm-Gearing Tooth 

      Ghelase, Daniela; Dașchievici, Luiza (Universitatea "Dunărea de Jos" din Galați, 2007)
      By means of own software, which evaluates the rigidity of the worm-gear-tooth system, the paper presents some aspects regarding the amplitude of rigidity. The study was made on the elasticity characteristic of worm-gearing ...

    • The Study of the Influence of Stability for Hydraulic Tracked Excavators Excavators with Bucket Using Assisted 

      Hauk, Niculai (Universitatea "Dunărea de Jos" din Galați, 2007)
      The technological process of digging the natural earth using hydraulic excavators with bucket has the following steps: dislocation, transporting and depositing in means of transportation. During this process the excavator ...

    • All-Purpose Low Frequency Numerical Filter 

      Oproescu, Gheorghe (Universitatea "Dunărea de Jos" din Galați, 2007)
      A real signal is a complex system with mixed components. In addition to needed components appear unusable components with different origin, namely noise. The clearance or the reduction of the unwanted components is ...

    • A Model of the Mechanical Waves in Curved Bars 

      Oproescu, Gheorghe (Universitatea "Dunărea de Jos" din Galați, 2007)
      The different classical models of the mechanical waves in bars cover every a single type of the wave, respectively only longitudinal, transversal, inflexion or torsion wave and only in a rectilinear bar, every with his ...

    • The Grinding Charge of Rotary Mills 

      Ene, Gheorghe (Universitatea "dunărea de Jos" din Galați, 2007)
      This paper presents the achievemens of grinding charge for the tube mills with balls.The author shows charactheristic size of grinding media charge: bulk density, porosity, filling degree. Regarding this last size,the author ...

    • Influence of the Road Dislevels Upon the Traction System of the Self-Propelled Machines 

      Axinti, Gavril; Axinti, Adrian-Sorin (Universitatea "Dunărea de Jos" din Galați, 2007)
      The kinematic response is caused by run away about the equipment of the movement modeled in the mechanic system with degree of freedom. The kinematic excitation considered produces harmonic formally to the organ axle of ...

    • The Energetic Analysis of Hydraulic Actuators Used for Small Mobile Cranes 

      Axinti, Gavril (Universitatea "Dunărea de Jos" din Galați, 2007)
      The paper presents applied usual solutions to the action of light self-propelled cranes, up to 6 tf. It is accomplished an analysis of usual solutions of action and more over of comanding the equipment. It is analized ...

    • 3D Modelling a Spur Gearing with Solid Edge 

      Haraga, Georgeta (Universitatea "Dunărea de Jos' din Galați, 2006)
      The software Solid Edge software is a useful 3D computer aided design (CAD) running under Windows. The commands and icons of Solid Edge software offer the possibility to design various solids. In this paper are presented ...